top of page

We use a premium heavyweight 13 oz. scrim vinyl banner. It has a very smooth surface for best printing results. This material is typically used for billboards, building wraps, banners, event flags, trade show signage, parades, etc.


Be prepared for anything with durable, lightweight banners.
• Durable vinyl material, for in or outdoor use
• Sharp, full-color printing
• Hang your custom vinyl banner easily with optional grommets 
(strongly recommended – they make it a lot easier!)



Vinyl Banner (13 oz.)

    • Single-Sided single piece maximum size 10’ x 145’ w/o pocket and 9.5’ x 145’ w/ pocket ; Double-Sided banners maximum size 9.5’ x 145.
    • Oversized banners will be welded together (Double-Sided Banners are not available oversized)
    • High resolution digitally printed at 720 x 720
    • More optional finishing available
    • Indoor and outdoor use, waterproof and UV safe
    • Double sided banners are now 1 banner printed front and back



    • 13 oz. Matte Vinyl Banner




    Q: What optional finishings do you offer for this material?

    A: We offer 9 optional finishings for your needs:

    • Hem (free)
    • Grommet (free)
    • Pole pocket
    • Windslit
    • Webbing
    • D-ring
    • Reinforced corner using Banner Tabs
    • Rope
    • Velcro (Not available on Double-Sided Banners)


    Q: Do I need special Banner finishing?

    A: Whether you are ordering a street banner, large banner, or a long time use banner it is suggested to have the following additional finishing options selected:

    • Webbing
    • Reinforced corner using Banner Tabs
    • In addition to the finishing options it is suggested all grommets to be used upon installation.


    Q: Do you have any installation tips?

    A: We suggest all grommets be used during installation to prevent damages to the banner.


    Q: What size of banner could I do store pickup?

    A: You can store pickup any size of your banner order. Sizes up to 96" will be rolled and sizes over 96" will be folded.


    Q: What are suggested pole dimensions for optional pole pocket(s)?

    A: Please see our recommendation below:

    • 2” pole pocket accommodates 1” diameter pole and under
    • 3” pole pocket accommodates 1.5” diameter pole and under
    • 4” pole pocket accommodates 2” diameter pole and under


    Q: How to setup artwork files for pole pockets?

    A: Your submitted graphic should fit the dimensions of the print you ordered. There is no additional bleed required. There will be a hemline across the graphic, it will be 2", 3", or 4" from the edge of the graphic depending on what sized pole pocket you order.

bottom of page